Aluminum and Aluminum-Alloy Drawn Seamless Tubes B210 Archives

Aluminum and Aluminum-Alloy Drawn Seamless Tubes B210

Category

Description

Deprecated: Function wp_make_content_images_responsive is deprecated since version 5.5.0! Use wp_filter_content_tags() instead. in /home/rdazpequ/public_html/wp-includes/functions.php on line 5413

Aluminum and Aluminum-Alloy Drawn Seamless Tubes B210
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes This standard is issued under the fixed designation B 210; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense.



Scope
This specification covers aluminum and aluminum- alloy drawn seamless tubes in straight lengths and coils for general purpose and pressure applications in alloys (Note 2), tempers, and thicknesses shown. Coiled tubes are generally available only as round tubes with a wall thickness not exceeding 0.083 in. and only in nonheat-treatable alloys. Alloy and temper designations are in accordance with ANSI H35.1. The equivalent Unified Numbering System alloy designations are preceded by A9, for example, A91100 for aluminum designation 1100 in accordance with Practice E 527. NOTE 1—See Specification B 483 for aluminum-alloy drawn tubes for general purpose applications; Specification B 234 for aluminum-alloy drawn seamless tubes for condensers and heat exchangers; and Specifi-cation B241/B241M for aluminum-alloy seamless pipe and seamless extruded tube. NOTE 2—Throughout this specification, use of the term alloy in the general sense includes aluminum as well as aluminum alloy. A complete metric companion to Specification B 210 has been developed—Specification B 210M; therefore, no metric equivalents are presented in this specification. For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2








Tensile Properties of Material as Supplied
Limits—Tube shall conform to the tensile property requirements specified. Number of Specimens: For tubes having a nominal weight of less than 1 lb/linear ft, one tension test specimen shall be taken for each 1000 lb or fraction thereof in a lot. For tubes having a nominal weight of 1 lb or more/ linear ft, one tension test specimen shall be taken for each 1000 ft or fraction thereof in a lot. If the shipment contains tubes of more than one alloy, temper, or size, only those tubes of the same alloy, temper, and size shall be grouped for the purpose of selecting tension test specimens. Other procedures for selecting samples may be employed if agreed upon by the producer and the purchaser. Test Specimens—Geometry of test specimens and the location in the product from which they are taken shall be as specified in Test Methods B 557. Test Methods—The tension tests shall be made in accordance with Test Methods B 557.






Tensile Property Limits^AB
Temper	Thickness,⁰ in.	Tensile Strength, ksi		Yield Strength⁰(0.2 % offset), min, ksi	Elongation in 2 in or 4 x Diameter,E min, %
		min	max		Full-Section Specimen	0ut-Out Specimen
Aluminum 1060^F
O	0.018-0.500	8.5	13.5	2.5
H12		10.0		4.0
H14		12.0		10.0
H18		16.0		13.0
H113^G		8.5		2.5
Aluminum 1100^F
O	0.018-0.500	11.0	15.5	3.5
H12		14.0		11.0
H14		16.0		14.0
H16		19.0		17.0
H18		22.0		20.0
H113^G		11.0		3.5
Alloy 2011
T3	0.018-0.049	47.0		40.0
	0.050-0.500	47.0		40.0	10	8
T4511	0.018-0.049	44.0		25.0
					20	18
	0.050-0.259	44.0		25.0
	0.260-0.500	44.0		25.0	20	20
Alloy 2014
O	0.018-0.500		32.0	16.0 max
T4, T42^H	0.018-0.024	54.0		30.0	10
	0.025-0.049	54.0		30.0	12	10
	0.050-0.259	54.0		30.0	14	10
	0.260-0.500	54.0		30.0	16	12
T6, T62^H	0.018-0.024	65.0		55.0	7
	0.025-0.049	65.0		55.0	7	6
	0.050-0.259	65.0		55.0	8	7
	0.260-0.500	65.0		55.0	9	8
Alloy 2024
O	0.018-0.500		32.0	15.0 max
T3^H	0.018-0.024	64.0		42.0	10
	0.025-0.049	64.0		42.0	12	10
	0.050-0.259	64.0		42.0	14	10
	0.260-0.500	64.0		42.0	16	12
T42^H	0.018-0.024	64.0		40.0	10
	0.025-0.049	64.0		40.0	12	10
	0.050-0.259	64.0		40.0	14	10
	0.260-0.500	64.0		40.0	16	12
Alloy 3003^f
O	0.010-0.024	14.0	19.0	5.0
	0.025-0.049	14.0	19.0	5.0	30	20
	0.050-0.259	14.0	19.0	5.0	35	25
	0.260-0.500	14.0	19.0	5.0		30
H12	0.010-0.500	17.0		12.0
H14	0.010-0.024	20.0		17.0	3
	0.025-0.049	20.0		17.0	5	3
	0.050-0.259	20.0		17.0	8	4
	0.260-0.500	20.0		17.0
H16	0.010-0.024	24.0		21.0
	0.025-0.049	24.0		21.0	3	2
	0.050-0.259	24.0		21.0	5	4
	0.260-0.500	24.0		21.0
H18	0.010-0.024	27.0		24.0	2
	0.025-0.049	27.0		24.0	3	2
	0.050-0.259	27.0		24.0	5	3
	0.260-0.500	27.0		24.0
H113^g	0.010-0.500	14.0		5.0
Alloy Alclad 3003
O	0.010-0.024	13.0	19.0	4.5
	0.025-0.049	13.0	19.0	4.5	30	20
	0.050-0.259	13.0	19.0	4.5	35	25
	0.260-0.500	13.0	19.0	4.5		30
H14	0.010-0.024	19.0		16.0
	0.025-0.049	19.0		16.0	5
	0.050-0.259	19.0		16.0	8	4
	0.260-0.500	19.0		16.0
H18	0.010-0.500	26.0		23.0
H113